Hayward, D., & Barnard, R. (1993). Treatment of acid mine wastewaters. Behandlung saurer Grubenwässer. World Mining Equipment, 17(6), 36–37.
Abstract: Überblick über einschlägige Verfahren zum Ausfällen der sauren Betandteile, Entfernen der Schwermetalle, und Einstellen des pH-Wertes auf einen Wert von 6 bis 9. Hauptsächliche Verfahren zum Ausfällen sind: Ausfällen mit Kalkhydrat (Ca(OH)2), mit Kalkstein, Calcium- oder Natriumsulfid. Durch Abtrennen des Niederschlages in einem Kläreindicker und zusätzliche Reinigung durch Filtrieren kann ein Anteil von 90% der unlöslichen Schwermetallverbindungen entfernt werden. Allgemein wird mit diesem Verfahren ein Standardgehalt von 5 mg/l erreicht. Durch zusätzliche Anwendung physikochemischer Verfahren kann der Schwermetallgehalt weiter gesenkt werden: Mikrofiltration, Umkehrosmose, Elektrodialyse, Ionenaustausch, biochemische und spezielle chemische Verfahren können je nach Eigenart der Grubenwässer verwendet werden.
|
Guo, F., & Yu, H. (1993). Hydrogeochemistry and treatment of acid mine drainage in southern China. In B. A. Zamora, & R. E. Connolly (Eds.), Proceedings of the Annual National Meeting – American Society for Surface Mining and Reclamation, vol.10 (pp. 277–283). The challenge of integrating diverse perspectives in reclamation.
Abstract: Coal mines and various sulfide ore deposits are widely distributed in Southern China. Acid mine drainage associated with coal and metal sulfide deposits affects water quality in some mined areas of Southern China. Mining operations accelerate this natural deterioration of water quality by exposing greater surface areas of reactive minerals to the weathering effects of the atmosphere, hydrosphere, and biosphere. Some approaches to reduce the effects of acid mine drainage on water quality are adopted, and they can be divided into two aspects: (a) Man-made control technology based on long-term monitoring of acid mine drainage; and, (b) Neutralization of acidity through the addition of lime. It is important that metals in the waste water are removed in the process of neutralization. A new method for calculating neutralization dosage is applied. It is demonstrated that the calculated value is approximately equal to the actual required value.
|
Eger, P., Melchert, G., Antonson, D., & Wagner, J. (1993). Magnesium hydroxide as a treatment for acid mine drainage in northern Minnesota. In B. A. Zamora, & R. E. Connolly (Eds.), Proceedings of the Annual National Meeting – American Society for Surface Mining and Reclamation, vol.10 (pp. 204–217). The challenge of integrating diverse perspectives in reclamation.
Abstract: Three alkaline materials were investigated for their suitability to treat acid mine drainage generated by a research facility located at a remote site in northern Minnesota. The materials investigated were hydrated lime, sodium hydroxide, and magnesium hydroxide. All three reagents were successful at raising pH and removing trace metals from the drainage, but the magnesium hydroxide had the added benefit of producing a maximum pH of approximately 9.5, while the other two reagents resulted in pH values of 12 and greater. In addition, the magnesium hydroxide was available as a high solid content slurry (58%) which simplified application and handling, and which produced the lowest volume of sludge of the materials tested.
|
Amacher, M. C., Brown, R. W., Kotuby-Amacher, J., & Willis, A. (1993). Adding sodium hydroxide to study metal removal in a stream affected by acid mine drainage. Research Paper, US Department of Agriculture, Forest Service, 465(17).
Abstract: Fisher Creek, a stream affected by acid mine drainage in the Beartooth Mountains of Montana, was studied to determine the extent to which copper (Cu) and zinc (Zn) would be removed from stream water when pH was increased by a pulse of sodium hydroxide (NaOH). Although the pH adjustment study indicated that precipitated Fe(OH) “SUB 3” (am) could rapidly remove Cu and Zn from a stream affected by acid mine drainage, the pH should be maintained in an optimal range (7 to 8.5) to maximize removal by adsorption. -from Authors
|
Kepler, D. A., & Mc Cleary, E. C. (1994). Successive Alkalinity-Producing Systems (SAPS) for the Treatment of Acid Mine Drainage. Proceedings, International Land Reclamation and Mine Drainage Conference, 1, 195–204.
Abstract: Constructed wetland treatment system effectiveness has been limited by the alkalinity-producing, or acidity-neutralizing, capabilities of systems. Anoxic limestone drains (ALD's) have allowed for the treatment of approximately 300 mg/L net acidic mine drainage, but current design guidance precludes using successive ALD's to generate alkalinity in excess of 300 mg/L because of concerns with dissolved oxygen. “Compost” wetlands designed to promote bacterially mediated sulfate reduction are suggested as a means of generating alkalinity required in excess of that produced by ALD's. Compost wetlands create two basic needs of sulfate reducing bacteria; anoxic conditions resulting from the inherent oxygen demand of the organic substrate, and quasi-circumneutral pH values resulting from the dissolution of the carbonate fraction of the compost. However, sulfate reduction treatment area needs are generally in excess of area availability and/or cost effectiveness. Second generation alkalinity-producing systems demonstrate that a combination of existing treatment mechanisms has the potential to overcome current design concerns and effectively treat acidic waters ad infinitum. Successive alkalinity-producing systems (SAPS) combine ALD technology with sulfate reduction mechanisms. SAPS promote vertical flow through rich organic wetland substrates into limestone beds beneath the organic compost, discharging the pore waters. SAPS allow for conservative wetland treatment sizing calculations to be made as a rate function based on pH and alkalinity values and associated contaminant loadings. SAPS potentially decrease treatment area requirements and have the further potential to generate alkalinity in excess of acidity regardless od acidity concentrations.
|