|
Lawrence, R. (2002). Technology reduces sulphur compounds – A new way of treating acid mine drainage. Canadian Mining Journal, 123(7), 27.
|
Erten-Unal, M., & Wixson, B. G. (1999). Biotreatment and Chemical Speciation of Lead and Zinc Mine/Mill Wastewater Discharges in Missouri, USA. Water Air Soil Pollut., 116(3-4), 501–522.
Abstract: Continued mining development in the world's largest lead producing area has generated and increased concern over effective mine water treatment in Missouri's New Lead Belt. A new type of mine/mill wastewater treatment system was constructed which consisted of a tailings pond followed by a series of artificially constructed meandering biotreatment channels and a polishing lagoon. This system provided additional retention time and distance for the removal of heavy metals by abundant aquatic plants and sedimentation. Seasonal field sampling and analytical testing that evaluated the present system confirmed that it provided good treatment for removal of heavy metals within the company property and produced a final effluent within the state and federal regulatory guidelines. On average, greater than 95% of zinc and manganese in the drainage water were removed by the biotreatment system, while lead and copper were 50 to 60%. A chemical equilibrium model, MINTEQ, was also used to identify various species of lead and zinc in the biotreatment system. The model predicted that the major species of carbonates and hydroxides would be the predominant complexes of lead and zinc for the pH and alkalinity values reported in the biotreatment system. These results were also supported by the literature.
|
Bertrand, S. (1997). Performance of a nanofiltration plant on hard and highly sulphated water during two years of operation. Desalination, 113(2-3), 277–281.
Abstract: A highly sulphated, hard water from a flooded iron mine was treated by nanofiltration for the production of drinking water (125 m(3)/h). This paper introduces the context and summarizes the configuration and operating conditions of the plant. The process performance in terms of product water quality and permeability during the first 2 years is presented and discussed.
|
|
Matsuoka, I. (1996). Mine drainage treatment. Shigen to Sozai = Journal of the Mining and Materials Processing Institute of Japan, 112(5), 273–281.
|
Turek, M., & Gonet, M. (1997). Nanofiltration in the utilization of coal-mine brines. Desalination, 108(1-3), 171–177.
Abstract: The utilization of saline coal mine waters is considered to be the most adequate method of solving ecological problems caused by this kind of water in Poland. In the case of most concentrated waters, the so-called coalmine brines, the method of concentrating by evaporation in a twelve-stage expansion installation or vapour compression is applied, after which sodium chloride is manufactured. A considerable restriction in the utilization of coal mine brines is the high energy consumption in these methods of evaporation. An obstacle in the application of low energy evaporation processes, e.g. multi-stage flash, is the high concentration of calcium and sulfate ions in the coal mine brines. The present paper deals with the application of nanofiltration in the pretreatment of the brine. The application of nanofiltration membranes with an adequate pore size, including charged membranes, makes it possible to decrease the concentration of divalent ions in the permeate practically without any changes in the concentration of sodium chloride. Then the permeate may be concentrated in a multi-stage evaporation process, e.g. MSF, without any risk of the crystallization of gypsum. A combination of NF and MSF ought to set down the unit costs of the concentration of coal mine brines below those of mere evaporation.
|
