Abstract: Away back in 1953 few people in the world, let alone South Africa, knew or had heard about membrane desalination, but there was an increasing awareness that electrodialysis had considerable potential for the desalination of brackish water.In South Africa the development of the new gold fields in the northern Orange Free State and the problems posed by the presence of excessive volumes of very saline mine waters stimulated interest in desalination and the CSIR* in collaboration with the mining industry became involved in the development of the electrodialysis process. By 1959 the largest brackish desalination plant in the world had been built and commissioned. South Africans were thus in the forefront of this technology, even to the extent of making the required membranes locally.Our historical review of membrane development and the applications of membrane technology in Southern Africa encompasses both pressure- and voltage-driven processes. Examples of the pressure processes are microfiltration, ultrafiltration and charged membrane ultrafiltration or nanofiltration, and finally reverse osmosis with fixed and dynamically formed membranes. The voltage-drive processes considered are electrodialysis and electrodialysis reversal.

Abstract: Acid mine drainage (AMD) is one of the most significant environmental challenges facing the mining industry worldwide. It occurs as a result of natural oxidation of sulphide minerals contained in mining wastes at operating and closed/decommissioned mine sites. AMD may adversely impact the surface water and groundwater quality and land use due to its typical low pH, high acidity and elevated concentrations of metals and sulphate content. Once it develops at a mine, its control can be difficult and expensive. If generation of AMD cannot be prevented, it must be collected and treated. Treatment of AMD usually costs more than control of AMD and may be required for many years after mining activities have ceased. Therefore, application of appropriate control methods to the site at the early stage of the mining would be beneficial. Although prevention of AMD is the most desirable option, a cost-effective prevention method is not yet available. The most effective method of control is to minimize penetration of air and water through the waste pile using a cover, either wet (water) or dry (soil), which is placed over the waste pile. Despite their high cost, these covers cannot always completely stop the oxidation process and generation of AMD. Application of more than one option might be required. Early diagnosis of the problem, identification of appropriate prevention/control measures and implementation of these methods to the site would reduce the potential risk of AMD generation. AMD prevention/control measures broadly include use of covers, control of the source, migration of AMD, and treatment. This paper provides an overview of AMD prevention and control options applicable for developing, operating and decommissioned mines.

Abstract: This paper describes Acid Mine Drainage (AMD) generation and its associated technical issues. As AMD is recognized as one of the more serious environmental problems in the mining industry, its causes, prediction and treatment have become the focus of a number of research initiatives commissioned by governments, the mining industry, universities and research establishments, with additional inputs from the general public and environmental groups. In industry, contamination from AMD is associated with construction, civil engineering mining and quarrying activities. Its environmental impact, however, can be minimized at three basic levels: through primary prevention of the acid-generating process; secondary control, which involves deployment of acid drainage migration prevention measures; and tertiary control, or the collection and treatment of effluent.