|
|
Younger, P. L., Banwart, S. A., & Hedin, R. S. (2002). (B. J. Alloway, & J. T. Trevors, Eds.). Mine water; hydrology, pollution, remediation. Dordrecht: Kluwer Academic Publishers.
|
|
|
|
Younger, P. L., Banwart, S. A., & Hedin, R. S. (2002). Mine Water – Hydrology, Pollution, Remediation. Dordrecht: Kluwer.
Abstract: Nowhere is the conflict between economic progress and environmental quality more apparent than in the mineral extraction industries. The latter half of the 20th century saw major advances in the reclamation technologies. However, mine water pollution problems have not been addressed. In many cases, polluted mine water long outlives the life of the mining operation. As the true cost of long-term water treatment responsibilities has become apparent, interest has grown in the technologies that would decrease the production of contaminated water and make its treatment less costly. This is the first book to address the mine water issue head-on. The authors explain the complexities of mine water pollution by reviewing the hydrogeological context of its formation, and provide an up-to-date presentation of prevention and treatment technologies. The book will be a valuable reference for all professionals who encounter polluted mine water on a regular or occasional basis. Foreword; R. Fernández Rubio. Preface. 1. Mining and the Water Environment. 2. Mine Water Chemistry. 3. Mine Water Hydrology. 4. Active Treatment of Polluted Mine Waters. 5. Passive Treatment of Polluted Mine Waters
|
|
|
|
Nuttall, C. A. (2002). Mine Water Treatment.
|
|
|
|
Wolkersdorfer, C. (2002). Mine water tracing. Geological Society Special Publication, -(198), 47–60.
Abstract: This paper describes how tracer tests can be used in flooded underground mines to evaluate the hydrodynamic conditions or reliability of dams. Mine water tracer tests are conducted in order to evaluate the flow paths of seepage water, connections from the surface to the mine, and to support remediation plans for abandoned and flooded underground mines. There are only a few descriptions of successful tracer tests in the literature, and experience with mine water tracing is limited. Potential tracers are restricted due to the complicated chemical composition or low pH mine waters. A new injection and sampling method ('LydiA'-technique) overcomes some of the problems in mine water tracing. A successful tracer test from the Harz Mountains in Germany with Lycopodium clavatum, microspheres and sodium chloride is described, and the results of 29 mine water tracer tests indicate mean flow velocities of between 0.3 and 1.7 m min-1.
|
|
|
|
Scholz, M. (2002). Mature experimental constructed wetlands treating urban water receiving high metal loads. Biotechnology Progress, 18(6), 1257–1264.
Abstract: The aim was to assess over 2 years the treatment efficiencies of vertical-flow wetland filters containing macrophytes and granular media of different. adsorption capacities. Different concentrations of lead and copper sulfate (constant for 1 year each) were added to urban beck inflow water in order to simulate pretreated (pH adjustment assumed) mine wastewater. After 1 year of operation, the inflow concentrations for lead and copper were increased from 1.30 to 2.98 and from 0.98 to 1.93 mg/L, respectively. However, the metal mass load rates (mg/m(2)/d) were increased by a factor of approximately 4.9 for lead and 4.3 for copper. No breakthrough of metals was recorded. Lead and copper accumulated in the biomass of the litter zone and rhizomes of the macrophytes. Furthermore, microbiological activity decreased during the second year of operation. Bioindicators such as ciliated protozoa and zooplankton decreased sharply in numbers but diatoms increased. In conclusion, the use of macrophytes and, adsorption media did not significantly enhance the filtration of lead and copper. Particulate lead is removed by filtration processes including straining. Furthermore, some expensive and time-consuming water quality variables can be predicted with less expensive ones such as temperature in order to reduce sampling costs.
|
|
