|   | 
Details
   web
Records
Author Cravotta, C.A., III; Trahan, M.K.
Title Limestone drains to increase pH and remove dissolved metals from acidic mine drainage Type Journal Article
Year 1999 Publication Appl. Geochem. Abbreviated Journal
Volume 14 Issue 5 Pages 581-606
Keywords (down) manganese oxide redox processes sulfate waters iron-oxides adsorption ions oxidation surfaces environments aluminum
Abstract Despite encrustation by Fe and Al hydroxides, limestone can be effective for remediation of acidic mine drainage (AMD). Samples of water and limestone (CaCO3) were collected periodically for 1 a at 3 identical limestone-filled drains in Pennsylvania to evaluate the attenuation of dissolved metals and the effects of pH and Fe- and Al-hydrolysis products on the rate of CaCO3 dissolution. The influent was acidic and relatively dilute (pH < 4; acidity < 90 mg) but contained 1-4 mg . L-1 of O-2, Fe3+, Al3+ and Mn2+. The total retention time in the oxic limestone drains (OLDs) ranged from 1.0 to 3.1 hr. Effluent remained oxic (O-2 > 1 mg . L-1) but was near neutral (pH = 6.2-7.0); Fe and Al decreased to less than 5% of influent concentrations. As pH increased near the inflow, hydrous Fe and Al oxides precipitated in the OLDs, The hydrous oxides, nominally Fe(OH)(3) and Al(OH)(3), were visible as loosely bound, orange-yellow coatings on limestone near the inflow. As time elapsed, Fe(OH)(3) and Al(OH)(3) particles were transported downflow. The accumulation of hydrous oxides and elevated pH (> 5) in the downflow part of the OLDs promoted sorption and coprecipitation of dissolved Mn, Cu, Co, Ni and Zn as indicated by decreased concentrations of the metals in effluent and their enrichment relative to Fe in hydrous-oxide particles and coatings on limestone. Despite thick (similar to 1 mm) hydrous-oxide coatings on limestone near the inflow, CaCO3 dissolution was more rapid near the inflow than at downflow points within and the OLD where the limestone was not coated. The high rates of CaCO3 dissolution and Fe(OH3) precipitation were associated with the relatively low pH and high Fe3+ concentration near the inflow. The rate of CaCO3 dissolution decreased with increased pH and concentrations of Ca2+ and HCO3- and decreased Pco(2). Because overall efficiency is increased by combining neutralization and hydrolysis reactions, an OLD followed by a settling pond requires less land area than needed for a two-stagetreatment system consisting of an anoxic limestone drain and oxidation-settling pond or wetland. To facilitate removal of hydrous-oxide sludge, a perforated-pipe subdrain can be installed within an OLD. (C) 1999 Elsevier Science Ltd.
Address
Corporate Author Thesis
Publisher Place of Publication Editor
Language Summary Language Original Title
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 0883-2927 ISBN Medium
Area Expedition Conference
Notes Jul; Limestone drains to increase pH and remove dissolved metals from acidic mine drainage; Isi:000080043300004; file:///C:/Dokumente%20und%20Einstellungen/Stefan/Eigene%20Dateien/Artikel/10102.pdf; AMD ISI | Wolkersdorfer Approved no
Call Number CBU @ c.wolke @ 17470 Serial 22
Permanent link to this record
 

 
Author Mohan, D.; Chander, S.
Title Removal and recovery of metal ions from acid mine drainage using lignite-A low cost sorbent Type Journal Article
Year 2006 Publication J. Hazard. Mater. Abbreviated Journal
Volume 137 Issue 3 Pages 1545-1553
Keywords (down) Geobase: Related Topics geobase: related topics (901) acid mine drainage adsorption ion iron sulfide lignite wastewater water treatment
Abstract Acid mine drainage (AMD), has long been a significant environmental problem resulting from the microbial oxidation of iron pyrite in presence of water and air, affording an acidic solution that contains toxic metal ions. The main objective of this study was to remove and recover metal ions from acid mine drainage (AMD) by using lignite, a low cost sorbent. Lignite has been characterized and used for the AMD treatment. Sorption of ferrous, ferric, manganese, zinc and calcium in multi-component aqueous systems was investigated. Studies were performed at different pH to find optimum pH. To simulate industrial conditions for acid mine wastewater treatment, all the studies were performed using single and multi-columns setup in down flow mode. The empty bed contact time (EBCT) model was used for minimizing the sorbent usage. Recovery of the metal ions as well as regeneration of sorbent was achieved successfully using 0.1 M nitric acid without dismantling the columns. < copyright > 2006 Elsevier B.V. All rights reserved.
Address D. Mohan, Department of Energy and Geo-Environmental Engineering, The Pennsylvania State University, University Park, PA 16802, United States dm_1967@hotmail.com
Corporate Author Thesis
Publisher Place of Publication Editor
Language Summary Language Original Title
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 0304-3894 ISBN Medium
Area Expedition Conference
Notes Oct 11; Removal and recovery of metal ions from acid mine drainage using lignite-A low cost sorbent; 2919875; Netherlands 56; Geobase Approved no
Call Number CBU @ c.wolke @ 17634 Serial 295
Permanent link to this record
 

 
Author Eger, P.
Title Wetland Treatment for Trace-metal Removal from Mine Drainage – the Importance of Aerobic and Anaerobic Processes Type Journal Article
Year 1994 Publication Water Sci. Technol. Abbreviated Journal
Volume 29 Issue 4 Pages 249-256
Keywords (down) copper cobalt nickel zinc ion exchange sulfate reduction adsorption acid mine drainage passive treatment
Abstract When designing wetland treatment systems for trace metal removal, both aerobic and anaerobic processes can be incorporated into the final design. Aerobic processes such as adsorption and ion exchange can successfully treat neutral drainage in overlandflow systems. Acid drainage can be treated in anaerobic systems as a result of sulfate reduction processes which neutralize pH and precipitate metals.Test work on both aerobic and anaerobic systems has been conducted in Minnesota. For the past three years, overland flow test systems have successfully removed copper, cobalt, nickel and zinc from neutral mine drainage. Nickel, which is the major contaminant, has been reduced around 90 percent from 2 mg/L to 0.2 mg/L. A sulfate reduction system has successfully treated acid mine drainage for two years, increasing pH from 5 to over 7 and reducing concentrations of all metals by over 90 percent.Important factors to consider when designing wetlands to remove trace metals include not only the type of wetlandrequired but also the size of the system and the residence time needed to achieve the water quality standards.
Address
Corporate Author Thesis
Publisher Place of Publication Editor
Language Summary Language Original Title
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 0273-1223 ISBN Medium
Area Expedition Conference
Notes Wetland Treatment for Trace-metal Removal from Mine Drainage – the Importance of Aerobic and Anaerobic Processes; Isi:A1994nv30000032; AMD ISI | Wolkersdorfer Approved no
Call Number CBU @ c.wolke @ 17336 Serial 394
Permanent link to this record
 

 
Author Stoica, L.; Dima, G.
Title Pb(II) removal from aqueous systems by biosorption-flotation on mycelial residues of Penicillium chrysogenum Type Book Chapter
Year 2000 Publication 7th international Mine Water Association congress; Mine water and the environment Abbreviated Journal
Volume Issue Pages 472-481
Keywords (down) bioremediation; flotation; ground water; lead; metals; Penicillium; Penicillium chrysogenum; pollution; remediation; sorption; water treatment 22, Environmental geology
Abstract
Address
Corporate Author Thesis
Publisher Uniwersytet Slaski Place of Publication Sosnowiec Editor Rozkowski, A.
Language Summary Language Original Title
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN ISBN 8387431230 Medium
Area Expedition Conference
Notes Pb(II) removal from aqueous systems by biosorption-flotation on mycelial residues of Penicillium chrysogenum; GeoRef; English; 2002-018169; 7th international Mine Water Association congress; Mine water and the environment, Katowice-Ustron, Poland, Sept. 11-15, 2000 References: 6; illus. incl. 4 tables Approved no
Call Number CBU @ c.wolke @ 5852 Serial 228
Permanent link to this record
 

 
Author Blowes, D.W.; Ptacek, C.J.; Benner, S.G.; McRae, C.W.T.; Puls, R.W.
Title Treatment of dissolved metals using permeable reactive barriers Type Journal Article
Year 1998 Publication Groundwater Quality: Remediation and Protection Abbreviated Journal
Volume Issue 250 Pages 483-490
Keywords (down) adsorption; aquifers; attenuation; dissolved materials; metals; nutrients; oxidation; pollutants; pollution; precipitation; reduction; water treatment Groundwater quality Pollution and waste management non radioactive Groundwater acid mine drainage aquifer pollution conference proceedings containment barrier metal tailings Canada Ontario Nickel Rim Mine United States North Carolina Elizabeth City mine water treatment
Abstract Permeable reactive barriers are a promising new approach to the treatment of dissolved contaminants in aquifers. This technology has progressed rapidly from laboratory studies to full-scale implementation over the past decade. Laboratory treatability studies indicate the potential for treatment of a large number of inorganic contaminants, including As, Cd, Cr, Cu, Hg, Fe, Mn, Mo, Ni, Pb, Se, Tc, U, V, NO3, PO4, and SO4. Small scale field studies have indicated the potential for treatment of Cd, Cr, Cu, Fe, Ni, Pb, NO3, PO4, and SO4. Permeable reactive barriers have been used in full-scale installations for the treatment of hexavalent chromium, dissolved constituents associated with acid-mine drainage, including SO4, Fe, Ni, Co and Zn, and dissolved nutrients, including nitrate and phosphate. A full-scale barrier designed to prevent the release of contaminants associated with inactive mine tailings impoundment was installed at the Nickel Rim mine site in Canada in August 1995. This reactive barrier removes Fe, SO,, Ni and other metals. The effluent from the barrier is neutral in pH and contains no acid-generating potential, and dissolved metal concentrations are below regulatory guidelines. A full-scale reactive barrier was installed to treat Cr(VI) and halogenated hydrocarbons at the US Coast Guard site in Elizabeth City, North Carolina, USA in June 1996. This barrier removes Cr(VI) from >8 mg l(-1) to <0.01 mg l(-1).
Address
Corporate Author Thesis
Publisher Place of Publication Editor
Language Summary Language Original Title
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 0144-7815 ISBN Medium
Area Expedition Conference
Notes Treatment of dissolved metals using permeable reactive barriers; Isip:000079718200072; Times Cited: 0; ISI Web of Science Approved no
Call Number CBU @ c.wolke @ 8601 Serial 178
Permanent link to this record