|
Fischer, R., Luckner, L., Peukert, D., Reißig, H., & Roßbach, B. (2002). Einsatz alkalischer Substanzen zur Verbesserung der Wasserqualität in Bergbaukippen. Use of alcine substances for the improvement of water quality in mining areas. Das Gas und Wasserfach. Ausgabe Wasser, Abwasser, 143(12), 891–898.
Abstract: Eisendisulfidminerale im Abraum von Braunkohlentagebauen können nach ihrer Verwitterung im wiederaufsteigenden Grundwasser erhebliche Güteverschlechterungen hinsichtlich pH-Wert, Schwermetall- und Sulfatgehalt verursachen. Diesen kann durch Zusätze alkalischer Substanzen zum Abraum wie Kalkstein, Dolomit und Kraftwerksasche bzw. Gemischen dieser Stoffe entgegengewirkt werden. Die Ergebnisse entsprechender Untersuchungen sowie die naturwissenschaftlichen Grundlagen der Eisendisulfidverwitterung werden im Beitrag dargestellt und ein Anwendungsbeispiel beschrieben. Grundlagen zur Berechnung der einzusetzenden Kalk- oder Aschemengen (bzw. Gemische der beiden Substanzen) sind die Bestimmung der oxidierbaren Sulfidminerale in den einzelnen geologischen Schichten sowie die Bestimmung der Pufferkapazität der Asche bzw. des Kalksteins. Besonders Vorteilhaft ist der Einsatz alkalischer Substanzen dort, wo durch vorhandene hohe Pyrit- und Markasitkonzentrationen mit einer erheblichen Versauerung des Grundwassers gerechnet und dadurch eine potentielle Beeinträchtigung von Grundwassernutzern erwartet werden muss. Solche Bedingungen sind im Rheinischen Braunkohlerevier, insbesondere im Umfeld des Tagebaus Garzweiler II (RWE Rheinbraun AG) gegeben. Derzeit werden im Tagebau Garzweiler bereits 40000 t Kalkstein dem Abraum beigemischt. Auch für das Lausitzer Braunkohlenrevier könnte ein Einsatz alkalischer Substanzen in Betracht gezogen werden.
|
|
|
Dennison, F. E. (2002). Constructed wetlands for the treatment of British mine drainage waters : a biogeochemical approach. Ph.D. thesis, University of Wales,, Bangor.
|
|
|
Demin, O. A., Dudeney, A. W. L., & Tarasova, I. I. (2002). Remediation of Ammonia-rich Minewater in Constructed Wetlands. Environ. Technol., 23(5), 497–514.
Abstract: A three-year study of ammonia removal from minewater was carried out employing constructed wetland systems (surface flow wetland and subsurface flow wetland cells) at the former Woolley Mine in West Yorkshire, UK The 1.4 Ha surface flow wetland (constructed in 1995) reduced the ammonia concentration from 3.5 – 4.5 mg l(-1) to < 2 3 mg V during the first half of the study and to essentially zero in the last year (2000 – 2001). About 25 % of contained ammonia was converted to nitrate, about 10 % was consumed by the plants and up to 30 % was converted to nitrogen gas. This maturation effect was attributed to increased depth of sludge from sedimentation of ochre, providing increased surface area for immobilisation of ammonia oxidising bacteria. The surface flow wetland finally removed 23 g m(-2) day(-1) ammonia in comparison with 3.8 g m(-2) day' for the subsurface flow (pea gravel) wetland cells, constructed for the present work and dosed with ammonium salts. Removal of ammonia by both systems was consistent with well-established mechanisms of nitrification and denitrification. It was also consistent with ammonia removal in wastewater wetland systems, although the greater aeration in the minewater systems obviated the need for special aeration cycles. The general role of wetland plants in such aerated conditions was attributed to maintaining hydraulic conditions (such as hydraulic efficiency and hydraulic resistance of substratum in subsurface flow systems) in the wetlands and providing a suspended solids filter for minewater.
|
|
|
Chalaturnyk, R. J., Scott, J. D., & Ozum, B. (2002). Management of Oil Sands Tailings. Pet. Sci. Technol., 20(9-10), 1025–1046.
Abstract: In Alberta, oil sands bitumen is utilized for synthetic crude oil (SCO) production by surface mining, bitumen extraction followed by primary (coking) and secondary (catalytic hydro-treating) upgrading processes. SCO is further refined in specially designed or slightly modified conventional refineries into transportation fuels. Oil sands tailings, composed of water, sands, silt, clay and residual bitumen, is produced as a byproduct of the bitumen extraction process. The tailings have poor consolidation and Water release characteristics. For twenty years, significant research has been performed to improve the consolidation and water release characteristics of the tailings. Several processes were developed for the management of oil sands tailings, resulting in different recovered water characteristics, consolidation rates and consolidated solid characteristics. These processes may affect the performance of the overall plant operations. Apex Engineering Inc. (AEI) has been developing a process for, thesame purpose. In this process oil sands tailings are treated with Ca(OH)(2) lime and CO2 and thickened using a suitable thickener. The combination of chemical treatment and the use of a thickener results in the release of process water in short retention times without accumulation of any ions in the recovered water. This makes it possible to recycle the recovered water, probably after a chemical treatment, as warm as possible, which improves the thermal efficiency of the extraction process. The AEI Process can be applied in many different fashions for the management of different fractions of the tailings effluent, depending on the overall plant operating priorities.
|
|
|
Bloom, N. S., Preus, E., Kilner, P. I., von der Geest, E., & Hensman, C. E. (2002). Very efficient removal of toxic metals from acid mine drainage water (Berkeley Pit, Montana) with a recycled alkaline industrial waste product Hardrock mining 2002; issues shaping the industry..
|
|