Abstract: BASX Systems LLC has developed a treatment system based on ceramic membranes for the removal of heavy metals from an acid mine drainage stream. This stream also contained volatile organic compounds that were required to be removed prior to discharge to a Colorado mountain stream. The removal of heavy metals was greater than 99% in most cases. A decrease of 30% in chemicals required for treatment and a reduction by more than 75% in labor over a competing technology were achieved. These decreases were obtained for operating temperatures of less than 5 degrees C. This system of ceramic microfiltration is capable of treating many different types of acid mine waste streams for heavy metals removal.

Abstract: The Gilt Edge gold mine is an acid drainage site that has been put on an accelerated closure schedule. The mine ceased activities in 1999 when Dakota Mining Corporation declared bankruptcy forcing the State of South Dakota to immediatly assume water treatment operations. Evaluation of conceptual closure plan options and cost estimates led the State of South Dakota to a decision to seek Federal assistance. The site has quickly moved into reclamation mode for the principal contamination source, the Ruby waste-rock dump. Designs and specifications for capping the Ruby waste-rock dump were prepared while Superfund listing was pursued. In October of 2000, mobilization of the first reclamation contractor began and by December the site was added to the National Priorities List. Capping the waste-rock dump will address a major acid drainage source. Water treatment requirements are expected to decline as conventional methods such as diverting clean water, backfilling, grading, capping, limestone neutralization, and revegetation are implemented. Acid seepage from underground workings, steep highwalls, and some pit backfills will remain. Major field trials of emerging technologies are nearing completion and some are showing promising results. Carbon reduction in a pit lake, and pyrite microencapsulation on simulated waste dumps, are showing initial success. Their application may minimize or eliminate the need for long-term active water treatment which has been a long sought goal for major acid rock drainage sites.

Abstract: For the past 40 years various approaches have been developed to treat acid waters coming from abandoned as well as operating mining operations. System designs have evolved to meet increasingly stringent discharge permit limits for treated water, as well as to provide solid disposal within economic constraints. A treatment system for remediation of acid mine drainage (AMD) or acid groundwater (AG) requires two main steps: 1. The addition of chemicals to precipitate dissolved metals contained in the waters, and if necessary, to coagulate the precipitated solids ahead of physical separation. 2. Physical separation of the precipitated solids from the water so the water can be lawfully discharged from the site. Choosing the appropriate technology and equipment results in the most efficient plant design, the lowest capital outlay, and minimum operating cost. The goal of these plants is to discharge liquids and solids able to meet standards. The separation of solids from liquids can be achieved through various means, including gravity settling, flotation, mechanical dewatering, filtration and evaporation. As important as the liquid solids separation unit operations are, they are driven by the chemistry of the water to be treated. The content of the dissolved solids will influence the quality and quantity of the solids produced during precipitation. Thus the two aspects must be integrated, with chemistry first, then mechanical engineering. This presentation will provide an overview of a number of liquid solids separation tools currently being used to treat AMD-AG at several sites in the USA. It will also discuss how their operations are impacted by the chemistry of their particular acid water feeds. The tools used include clarifier-thickeners, solids contact clarifiers, dissolved air flotation, polishing filters, membrane filters, and mechanical dewatering devices (belt and filter presses, vacuum filters, and driers).