| Home | << 1 2 3 4 >> |
|
Younger, P. L., Banwart, S. A., & Hedin, R. S. (2002). Mine Water – Hydrology, Pollution, Remediation. Dordrecht: Kluwer.
Abstract: Nowhere is the conflict between economic progress and environmental quality more apparent than in the mineral extraction industries. The latter half of the 20th century saw major advances in the reclamation technologies. However, mine water pollution problems have not been addressed. In many cases, polluted mine water long outlives the life of the mining operation. As the true cost of long-term water treatment responsibilities has become apparent, interest has grown in the technologies that would decrease the production of contaminated water and make its treatment less costly. This is the first book to address the mine water issue head-on. The authors explain the complexities of mine water pollution by reviewing the hydrogeological context of its formation, and provide an up-to-date presentation of prevention and treatment technologies. The book will be a valuable reference for all professionals who encounter polluted mine water on a regular or occasional basis. Foreword; R. Fernández Rubio. Preface. 1. Mining and the Water Environment. 2. Mine Water Chemistry. 3. Mine Water Hydrology. 4. Active Treatment of Polluted Mine Waters. 5. Passive Treatment of Polluted Mine Waters
Keywords: mine water hydrology
|
|
Jarvis, A. P., & Younger, P. L. (2001). Passive treatment of ferruginous mine waters using high surface area media. Water Res., 35(15), 3643–3648.
Abstract: Rapid oxidation and accretion of iron onto high surface area media has been investigated as a potential passive treatment option for ferruginous, net-alkaline minewaters. Two pilot-scale reactors were installed at a site in County Durham, UK. Each 2.0m high cylinder contained different high surface area plastic trickling filter media. Ferruginous minewater was fed downwards over the media at various flow-rates with the objective of establishing the efficiency of iron removal at different loading rates. Residence time of water within the reactors was between 70 and 360s depending on the flow-rate (1 and 12l/min, respectively). Average influent total iron concentration for the duration of these experiments was 1.43mg/l (range 1.08-1.84mg/l; n=16), whilst effluent iron concentrations averaged 0.41mg/l (range 0.20-1.04mg/l; n=15) for Reactor A and 0.38mg/l (range 0.11-0.93mg/l; n=16) for Reactor B. There is a strong correlation between influent iron load and iron removal rate. Even at the highest loading rates (approximately 31.6g/day) 43% and 49% of the total iron load was removed in Reactors A and B, respectively. At low manganese loading rates (approximately 0.50-0.90g/day) over 50% of the manganese was removed in Reactor B. Iron removal rate (g/m3/d) increases linearly with loading rate (g/day) up to 14g/d and the slope of the line indicates that a mean of 85% of the iron is removed. In conclusion, it appears that the oxidation and accretion of ochre on high surface area media may be a promising alternative passive technology to constructed wetlands at certain sites.
|