| Home | << 1 >> |
|
Chung, I. J. (2001). Immobilization of arsenic in tailing by using iron and hydrogen peroxide. Environ. Technol., 22(7), 831–835.
Abstract: Under environmental conditions, arsenic (As) reveals anionic behavior and is converted into various forms in accordance with the Eh/pH condition. This causes the difficulty of treating As with other heavy metals in tailing. This study was carried out to develop the immobilization method of arsenic in tailing as ferric arsenate (FeAsO4) using hydrogen peroxide. According to experimental results, the extracted concentrations of arsenic and iron (Fe) from tailing were reduced up to 84% and 93%, respectively. In the experiment using pure Pyrite (FeS2) and As solution, As concentration decreased with an increase of hydrogen peroxide dosage. The experimental results of re-extraction showed that only 10% of As and 20% of Fe were extracted in the case of using hydrogen peroxide. As a result, the long-term stability of this method was clarified.
Keywords: mine water treatment
|
|
Demin, O. A., Dudeney, A. W. L., & Tarasova, I. I. (2002). Remediation of Ammonia-rich Minewater in Constructed Wetlands. Environ. Technol., 23(5), 497–514.
Abstract: A three-year study of ammonia removal from minewater was carried out employing constructed wetland systems (surface flow wetland and subsurface flow wetland cells) at the former Woolley Mine in West Yorkshire, UK The 1.4 Ha surface flow wetland (constructed in 1995) reduced the ammonia concentration from 3.5 – 4.5 mg l(-1) to < 2 3 mg V during the first half of the study and to essentially zero in the last year (2000 – 2001). About 25 % of contained ammonia was converted to nitrate, about 10 % was consumed by the plants and up to 30 % was converted to nitrogen gas. This maturation effect was attributed to increased depth of sludge from sedimentation of ochre, providing increased surface area for immobilisation of ammonia oxidising bacteria. The surface flow wetland finally removed 23 g m(-2) day(-1) ammonia in comparison with 3.8 g m(-2) day' for the subsurface flow (pea gravel) wetland cells, constructed for the present work and dosed with ammonium salts. Removal of ammonia by both systems was consistent with well-established mechanisms of nitrification and denitrification. It was also consistent with ammonia removal in wastewater wetland systems, although the greater aeration in the minewater systems obviated the need for special aeration cycles. The general role of wetland plants in such aerated conditions was attributed to maintaining hydraulic conditions (such as hydraulic efficiency and hydraulic resistance of substratum in subsurface flow systems) in the wetlands and providing a suspended solids filter for minewater.
|
|
Zhuang, J. M. (2004). Lignor(TM) process for acidic rock drainage treatment. Environ. Technol., 25(9), 1031–1040.
Abstract: The process using lignosulfonates for acidic rock drainage (ARD) treatment is referred to as the Lignor(TM) process. Lignosulfonates are waste by-products produced in the sulfite pulping process. The present study has shown lignosulfonates are able to protect lime from developing an external surface coating, and hence to favor its dissociation. Further, the addition of lignosulfonates to ARD solutions increased the clotting and settling rate of the formed sludge. The capability of lignosulfonates to form stable metal-lignin complexes makes them very useful in retaining metal ions and thus improving the long-term stability of the sludge against leaching. The Lignor(TM) process involves metal sorption with lignosulfonates, ARD neutralization by lime to about pH 7, pH adjustment with caustic soda to 9.4 – 9.6, air oxidation to lower the pH to a desired level, and addition of a minimum amount of FeCl3 for further removal of dissolved metals. The Lignor(TM) process removes all concerned metals (especially Al and Mn) from the ARD of the Britannia Mine (located at Britannia Beach, British Columbia, Canada) to a level lower than the limits of the B.C. Regulations. Compared with the high-density sludge (HDS) process, the Lignor(TM) process has many advantages, such as considerable savings in lime consumption, greatly reduced sludge volume, and improved sludge stability.
Keywords: mine water treatment
|