Laine, D. M., & Jarvis, A. P. (2003). Engineering design aspects of passive in situ remediation of mining effluents. Land Contam. Reclam., 11(2), 113–126.
Abstract: Passive treatment of contaminated effluents can offer a 'low cost' management opportunity to remediate drainages to the standards required by enforcement agencies. However, the initial cost of construction of passive treatment systems is significant and often in excess of that for active treatment systems. It is therefore important that the engineering design of the passive systems produces an effective and efficient scheme to enable the construction and maintenance costs to be minimised as far as possible. Possible parameters for the design of passive systems are suggested to seek to obtain uniformity in size and layout of treatment elements where this may be possible. Passive treatment systems include aeration systems, sedimentation ponds, aerobic and anaerobic wetlands, anoxic limestone drains and reducing alkalinity producing systems. Most active treatment systems also include passive elements in the treatment stream. The basic design considerations that should be considered to ensure the construction of efficient systems are discussed.
|
Mohan, D., & Chander, S. (2006). Removal and recovery of metal ions from acid mine drainage using lignite-A low cost sorbent. J. Hazard. Mater., 137(3), 1545–1553.
Abstract: Acid mine drainage (AMD), has long been a significant environmental problem resulting from the microbial oxidation of iron pyrite in presence of water and air, affording an acidic solution that contains toxic metal ions. The main objective of this study was to remove and recover metal ions from acid mine drainage (AMD) by using lignite, a low cost sorbent. Lignite has been characterized and used for the AMD treatment. Sorption of ferrous, ferric, manganese, zinc and calcium in multi-component aqueous systems was investigated. Studies were performed at different pH to find optimum pH. To simulate industrial conditions for acid mine wastewater treatment, all the studies were performed using single and multi-columns setup in down flow mode. The empty bed contact time (EBCT) model was used for minimizing the sorbent usage. Recovery of the metal ions as well as regeneration of sorbent was achieved successfully using 0.1 M nitric acid without dismantling the columns. < copyright > 2006 Elsevier B.V. All rights reserved.
|
Banks, D., Younger, P. L., Arnesen, R. - T., Iversen, E. R., & Banks, S. B. (1997). Mine-water chemistry: The good, the bad and the ugly. Environ. Geol., 32(3), 157–174.
Abstract: Contaminative mine drainage waters have become one of the major hydrogeological and geochemical problems arising from mankind's intrusion into the geosphere. Mine drainage waters in Scandinavia and the United Kingdom are of three main types: (1) saline formation waters; (2) acidic, heavy-metal-containing, sulphate waters derived from pyrite oxidation, and (3) alkaline, hydrogen-sulphide-containing, heavy-metal-poor waters resulting from buffering reactions and/or sulphate reduction. Mine waters are not merely to be perceived as problems, they can be regarded as industrial or drinking water sources and have been used for sewage treatment, tanning and industrial metals extraction. Mine-water problems may be addressed by isolating the contaminant source, by suppressing the reactions releasing contaminants, or by active or passive water treatment. Innovative treatment techniques such as galvanic suppression, application of bactericides, neutralising or reducing agents (pulverised fly ash-based grouts, cattle manure, whey, brewers' yeast) require further research.
|
Stefanoff, J. G., & Kim, Y. K. (1994). Reduction of leachability of heavy metals in acid mine drainage. J. Environ. Sci. Health Part A Environ. Sci. Eng., 29(2), 371–388.
Abstract: The leaching characteristics of sludges from the treatment of acid mine drainage(AMD) from Iron Mountain Mine near Redding, California were compared using two different processes: caustic soda treatment and a modified lime/sulfide treatment process. The modified lime/sulfide process produced a sludge with better dewaterability characteristics than sludge from the caustic soda process. The results of the Cal WET indicated that the modified lime/sulfide process sludge had less leachability than that of sludge from the caustic soda process. Both processes could achieve a substantial reduction of heavy metals in leachate to levels below the federal regulatory limits(TCLP). For cadmium and zinc, however, neither process produced a sludge that met the requirements of the Cal WET procedure.
|
Reiser, D. W., Vitter, M. W., & Todd, J. (1982). Reclamation of a Colorado stream impacted by acid mine drainage. Proceedings of the Annual Meeting, American Fisheries Society, Colorado Wyoming Chapter, 17, 120–132.
Abstract: A heavy metals treatment plant was designed to eradicate the water quality problems of the acid drainage. Within a month following plant operation, aquatic invertebrates were observed in the stream and within 2-3 months fish were recovered throughout the stream reach. -from Sport Fishery Abstracts
|
