| Home | << 1 2 3 4 5 6 7 8 9 >> |
|
Bernoth, L., Firth, I., McAllister, P., & Rhodes, S. (2000). Biotechnologies for Remediation and Pollution Control in the Mining Industry. Miner. Metall. Process., 17(2), 105–111.
Abstract: As biotechnologies emerge from laboratories into main-stream application, the benefits they, offer are judged against competing technologies and business criteria. Bioremediation technologies have passed this test and are now widely used for the remediation of contaminated soils and ground waters. Bioremediation includes several distinct techniques that are used for the treatment of excavated soil and includes other techniques that are used for in situ applications. They play an important and growingrole in the mining industry for cost-effective waste management and site remediation. Most applications have been for petroleum contaminants, but advances continue to be made in the treatment of more difficult organ ic and inorganic species. This paper discusses the role of biotechnologies in remediation and pollution control from a mining-industry perspective. Several case studies are presented, including the land application of oily wastewater from maintenance workshops, the composting of hydrocarbon-contaminated soils and sludges, the bioventing of hydrocarbon solvents, the intrinsic bioremediation of diesel hydrocarbons, the biotreatment of cyanide in water front a gold mine, and the removal of manganese from acidic mine drainage.
|
|
Aube, B. C. (2000). Molybdenum treatment at Brenda Mines. ICARD 2000, Vols I and II, Proceedings, , 1113–1119.
Abstract: Brenda Mines, located 22 km Northwest of Peachland in British Columbia, Canada was an open pit copper-molybdenum mine which closed in 1990 after 20 years of operation. The primary concern in Brenda's tailings and waste rock drainage is molybdenum at a concentration of approximately 3 mg/L.. The mine drainage is alkaline and contains little or none of the typically problematic heavy metals. Given that the waters downstream are used for municipal water supply and some irrigation, a discharge limit of 0.25 mg/L molybdenum was imposed with specific water quality guidelines in the receiving creek. A. review of all existing and potential molybdenum removal methods was undertaken prior to mine closure. The chosen process is a two-step iron co-precipitation with clarification and sand filtration at a slightly acidic pH. A 4,000 usgpm (912 m(3)/h) treatment plant was constructed and commissioned in 1998, at a cost of $10.5M. The successful removal of molybdenum from the drainage water is explained with details on some design innovations and operational challenges encountered during plant start-up. Investigated sludge disposal options are discussed although the long term disposal scenario has not yet been finalised.
Keywords: mine water treatment
|
|
Fripp, J., Ziemkiewicz, P. F., & Charkavorki, H. (2000). Acid Mine Drainage Treatment. Ecosystem Management and Restoration Research Program Technical Notes, Erdc Tn-Emrrp-Sr-14, 7.
Abstract: Contaminated water flowing from abandoned coal mines is one of the most significant contributors to water pollution in former and current coal-producing areas. Acid mine drainage (AMD) can have severe impacts to aquatic resources, can stunt terrestrial plant growth and harm wetlands, contaminate groundwater, raise water treatment costs, and damage concrete and metal structures. In the Appalachian Mountains of the eastern United States alone, more than 7,500 miles of streams are impacted. The Pennsylvania Fish and Boat Commission estimates that the economic losses on fisheries and recreational uses are approximately $67 million annually (ref). While most modern coal-mining operations (Figure 1) must meet strict environmental regulations concerning mining techniques and treatment practices, there are thousands of abandoned mine sites in the United States (Figure 2). Treatment of a single site can result in the restoration of several miles of impacted streams. The purpose of this document is to briefly summarize key issues related to AMD treatment. This document is intended as a brief overview; thus, it is neither inclusive nor exhaustive. The technical note presents the preliminary planning issues
Keywords: AMD treatment sampling
|
|
Sato, D., & Tazaki, K. (2000). Calcification treatment of mine drainage and depositional formula of heavy metals. Chikyu Kagaku = Earth Science, 54(5), 328–336.
Abstract: Depositional formula of heavy metals after disposal of the mine drainage from the Ogoya Mine in Ishikawa Prefecture, Japan, was mineralogically investigated. Strong acidic wastewater (pH 3.5) from pithead of the mine contains high concentration of heavy metals. In this mine, neutralizing coagulation treatment is going on by slaked lime (calcium hydroxides: Ca(OH) (sub 2) ). Core samples were collected at disposal pond to which the treated wastewater flows. The core samples were divided into 44 layers based on the color variation. The mineralogical and chemical compositions of each layer were analyzed by an X-ray powder diffractometer (XRD), an energy dispersive X-ray fluorescence analyzer (ED-XRF) and a NCS elemental analyzer. The upper parts are rich in brown colored layers, whereas discolored are the deeper parts. The color variation is relevant to Fe concentration. Brown colored core sections are composed of abundant hydrous ferric oxides with heavy metals, such as Cu, Zn, and Cd. On the other hand, S concentration gradually increases with depth. XRD data indicated that calcite decreases with increasing depth, and ettringite is produced at the deeper parts. Cd concentration shows similar vertical profile to those of calcite and ettringite. The results revealed that hydrous ferric oxides, calcite and ettringite are formed on deposition, whereby incorporating the heavy metals.
|
|
Weeks, R. E., Krohn, R., & Walker, T. H. (2000). Water management during the Pinto Valley removal action. In Tailings and Mine and Waste 2000, Proceedings of the Seventh International Conference, Fort Collins, US, Jan 22 26, 2000 (pp. 499–506).
Abstract: Der Bruch des Dammes einer Halde der Grube Nr. 14 des Kupfer- Bergbaubetriebes Pinto Valley in Arizona, USA, im Jahre 1997 führte zum Eintrag von 370000 yd(exp 3) Bergematerials und Tailings in das Bett des Flusses Pinto Creek, USA, wodurch letzteres blockiert wurde. Der Vorfall ereignete sich in bergigem Gelände unterhalb eines 14 Quadratmeilen großen Abschnittes des Flusseinzugsgebietes oberhalb des Sees Roosevelt Lake, USA, einer Trinkwasserquelle für Phoenix, USA. Aufgrund der Bedeutung des Gebietes wurde eine Strategie zur Verhütung weiterer Beeinträchtigungen der Wasserqualität ausgearbeitet. Diese beinhaltete Managementaspekte zur Gewährleistung einer schnellen Planung und Ausführung der notwendigen Arbeiten gekoppelt mit der Planung, dem Bau und dem Betrieb von Rückhalte und Umleitungssystemen für auftretende Wässer. Die Auslegung dieser Systeme erfolgte auf der Grundlage der Daten des Einzugsgebietes und der klimatischen Verhältnisse, wobei verschiedene Wahrscheinlichkeiten der Überschreitung der ermittelten Werte berücksichtigt wurden. Innerhalb von acht Monaten konnten die Tailings aus dem betroffenen Gebiet entfernt werden, ohne dass belastete Oberflächenwässer freigesetzt wurden.
|